about 1 month ago

For intelligent driving assistant products, to do not interfere with the driver's vision and normal driving is to get an admission ticket, and then talk about its function and role. However, the car space is limited, how to find a place in this inch, high integration is particularly important. If we succeed, we will wind up the waves and hang the clouds to sail the seas.

Automobile intelligent rearview mirror dash cam, compared with other intelligent driving auxiliary products, can be called an advantage. The car rearview mirror itself has a place in the car, and no one dared to shake its position. You should know that the endoscope is an important security component, its quality and installation location have the corresponding industry standards, can not be changed at will. And compared to products, if you can use the rearview mirror of this treasured land, then the probability of success will be much greater? So, let's see if these intelligent driving aids can now sail with the help of an automotive rearview mirror.

A traffic recorder is an instrument that records relevant information of images and sounds on the road. After installing the traveling recorder, it can record the video image and sound of the whole traveling process of the vehicle, which can provide evidence for traffic accidents. This is very important, for many drivers, with a driving recorder, you can be a lot of their own can not say clearly the accident more intuitive response, can be very effective to avoid being "touched porcelain". In addition, people who like to travel by themselves can also use it to record the process of conquering difficulties and obstacles. Driving while walking video, while the time, speed, location are recorded in the video, rather "black box". It can also be used for shooting DV life fun at home, or for home monitoring. Usually can also do parking monitoring, installation of car camera recorder.

From the point of view of function and function, traffic recorder is very good indeed. But most recorders are mounted on the front windshield by suction cup or glue, which can capture the driving picture very well, but it does disturb the driver's vision to a certain extent. Of course, if combined with the rearview mirror of the car, one does not occupy additional space, the other can also have a very good angle to shoot, while the use of the rearview mirror screen can also provide better visual effect.

HUD (Head Up Display) refers to the driver does not need to bow to see the important information it needs. Head-up displays first appeared on military aircraft, reducing the frequency of pilots looking down at instruments, avoiding interruptions in attention and loss of situational awareness. Because of the convenience of HUD and the improvement of driving safety, it has also been introduced into automobile driving.

But the data on the dashboard and the engine water temperature, battery voltage and other data, and even navigation functions projected onto the car's front windshield by way of projection. That way, it's true that you don't have to bow your head to see the data, but can you stop driving when strange reflections appear on the driver's windshield? Can not interfere with the line of sight? Some people say that I can be placed in a corner or edge, then do not do so contrary to your original intention?

With the help of rearview mirror, can the practical problems of HUD be solved effectively? The answer may not be entirely satisfactory, but at the very least, HUD can be retained on the car. Parallel movement of sight allows the driver to observe the required data at the lowest angle and the fastest speed, and to keep the road condition in front of the vehicle in his own view. Is this not a better way to protect the driver's vehicle safety? HUD since that is OK, OBD is no problem.

dash camera front and rear
rear view mirror dash cam
best front and rear dash camera
azdomemirror dash cam
front and rear dash camera

← Which kind of transportation tool is more fashion and stable? The difference between the USB3.1 and the Type-C interface →